Home → News → Tuning In to Graphene → Full Text

Tuning In to Graphene

By Alex Wright

Communications of the ACM, Vol. 56 No. 10, Pages 15-17
10.1145/2507771.2507776

[article image]

Save PDF

In March of this year, a team at the Georgia Institute of Technology made headlines when it revealed plans for a new microscopic antenna built out of graphene, a synthetic form of carbon with remarkable conductive properties.

Early press coverage focused on the promise of speedier wireless connections, and with good reason: such an antenna could, in principle, allow for terabit-per-second transfer speedsfast enough to download a high-definition movie in a fraction of a second. At distances of a few centimeters, download speeds could approach an astonishing 100 terabits per secondthe equivalent of three months' worth of HD footage.

While the prospect of faster downloads might come as welcome news to legions of everyday Web surfers, the technology's long-term potential extends well beyond the problem of easing Internet bottlenecks. Researchers are starting to explore a wide range of potential applications for graphene nano-antennas, such as linking the internal components of electronic devices or creating fine-tuned sensor networks capable of thwarting chemical or biological attacks.

Before any of those ideas can come to fruition, however, researchers will need to overcome a number of formidable hurdlesnot least of which involves the prohibitive cost of making graphene in the first place.

In 2004, Andre Geim and Konstantin Novoselov of the University of Manchester invented graphene by taking strips of graphite (the same technology that powers the humble Number 2 pencil) and attaching them to adhesive tape, then repeatedly separating the strips until they had isolated a one-atom thick layer of the substance they dubbed graphene.

Ever since that discoverywhich earned Geim and Novoselov a Nobel Prize in 2011graphene has generated a level of excitement in the materials engineering world not seen since the late-1990s boom in carbon nanotubes.

Some might argue that carbon nanotubes offer a cautionary tale: a much-hyped new material that failed to live up to its initial promise. Graphene's real-world prospects remain uncertain, given its current manufacturing cost of $3,000 per square meter, but its promoters hold out hope that researchers will address that challenge in the years to come.

Several major university research initiatives are now under way to explore new techniques for working with graphene, some of them supported by a major research funding initiative from the European Union. Meanwhile, companies like IBM, Intel, and Samsung are moving quickly to perfect new techniques for synthesizing the material.

This flurry of activity stems from graphene's seemingly incredible promise. It is exactly one atom thickas close to a two-dimensional material as possible. It is also nearly transparent, and flexible enough to take almost any form, yet it is also extremely denseharder than steel or diamond.

That remarkable combination of lightness, flexibility, and strength has prompted scientists to envision any number of potential manufacturing uses, including ocean liners, airplanes, automobiles, washing machines, transparent touch screens, and new kinds of solar cells.

Beyond its remarkable structural properties, graphene also boasts a perfect honeycomb structure that allows electrons to move with almost no resistance, up to 500 times faster than in silicon. That level of conductivity makes it ideally suited for building transistors, processors, memory, cellphonesor antennas.

Like carbon nanotubes, graphene features plasmons (electron oscillations) in one-dimensional structures that support the transmission of surface waves at frequencies in the terahertz band (0.1THz10THz). Many other materials, like fibers and plastics, are transparent at these frequencies, but graphene's dense structure allows it to propagate these signals quite effectively.

The Georgia Tech team, led by Ian Akyildiz, has proposed making an antenna out of graphene by creating pieces of graphene that are between 2 and 100 nanometers wide and one micrometer long, each capable of detecting electromagnetic waves in the terahertz frequency band. By using ultra-thin graphene nanoribbons instead of relatively larger graphene sheets, the team has found they can enhance the propagation of surface plasmon polariton waves, thus improving performance. The team's results will appear in a forthcoming issue of IEEE's Journal on Selected Areas in Communication.

Such antennas would be small enough to fit inside any number of microelectronic components. By stitching together multiple components in this way, the nano-antennas could create an entirely new kind of nanonetwork in which devices communicate directly with each other.


Graphene is just one atom thick, nearly transparent, and flexible enough to take almost any form, yet it is also extremely denseharder than steel or diamond.


In addition to providing a way to link all kinds of devices directly to each other and to the Internet, commercial graphene nano-antennas could also enable new kinds of access networks for 5G systems and small cell-enabled cellular network architectures for beyond 4G (B4G) networks.

Communicating over the terahertz band would also allow for higher bandwidth than conventional microwave or gigahertz bands. Those performance gains come at a price, however; graphene nano-antennas work best at ranges of less than one meter.

"The advantage of the terahertz band is the gigantic capacity," says Akyildiz. "The disadvantage is that they are distance-limited, because it is so fine-grained that the water particles and gas molecules in the air affect the signal propagation. Gas molecules are the biggest enemy."

Given these limitations, most research is currently focused on applications that involve communicating over short distances. That line of research has been evolving for several years, since well before the invention of graphene.

Peter J. Burke of the University of California, Irvine, conducted some of the foundational work on nanoantennas, developing the first RF circuit model for carbon nanotubes. Based on that early work, his team began to contemplate the possibility of nanoscale antennas, developing the first theoretical models of a carbon nanotube antenna, predictingcorrectlythat they would work well at terahertz frequencies.

Burke's team has since moved on to working with graphene, in part because graphene holds a major advantage over carbon nanotubes: the ability to tune its conducting properties.

"Graphene is interesting mainly because it enables very efficient dynamic control of the antenna's parameter at terahertz frequencies," says Julien Perruisseau-Carrier of the École Polytechnique Fédérale de Lausanne in Switzerland, whose team performed important early work on graphene antennas, in particular analyzing the possibilities of dynamic reconfiguration across a wide range of frequencies.

Such reconfigurability could allow graphene antennas to save power and limit interference, as well as perform highly targeted sensing.

"We are very excited because we can tune the electrical antenna properties of graphene with a DC voltage," says Burke. By changing the sheet resistance, his team has been able to lift the impedance of a graphene nanoantennasomething not possible with other kinds of nano-antennas.

In a recent paper, Burke's team proved that graphene could function over a broad frequency rangeat DC, 10GHz, 100GHz, and 100GHz1.5THz in a single sweep. The team was able to measure the graphene sheet's impedance with a novel spectrometer built by Elliott Brown at Wright State University in Ohio. Recently, the team has built on this work to tune the graphene antenna across the entire band from 100GHz to 1.5THz.

Given these physical limitations, researchers are focusing on scenarios that would benefit from placing nanoantennas and transmitters in close proximity to each other, to create what Akyildiz describes as "an Internet of nano-things."

At the most pedestrian level, such a network could offer hope of speeding up the "last mile" bottleneck that bedevils so many everyday Internet connections: the humble wireless router. For all the much-heralded advances in network speeds over the past few yearsFIOS, Terabit Internet, and IPv4, to name a fewmany of us have yet to see the full promise of these advances, thanks to the speed limits inherent in the 802.11n standard that most wireless routers follow.

A full-fledged nanonetwork could go much further than replacing old Wi-Fi routers, however. It could also, in theory, harvest vibrational or electromagnetic energy from the environment to reduce power consumption.

Looking further ahead, researchers are also starting to imagine long-range applications of highly miniaturized antennas. "Imagine what you could do if you could build a radio that could fit inside of a single cell?" asks Burke, whose team is now exploring the possibility of graphene nanoantennas that could bind to DNA.

Burke's team is working with Ned Seeman at New York University and Michael Norton at Marshall University, both of whom have done extensive work with DNA "origami," to explore the possibilities of nanoscale networks for DNA sensing. If successful, this initiative could bring graphene nanoantennas closer to the world of biochemistry.

As intriguing as some of these ideas may seem, the practical challenges remain daunting. At the most fundamental level, nanoantennas cannot work by themselves without additional components such as nanotransmitters and nanoreceiversneither of which exist yet. Akyildiz's team is currently applying for patents for graphene-based nanotransmitters and nanoreceivers.

In the meantime, several other teams around the world are pursuing related ideas for graphene-based antennas and related devices. While the early results are promising, the real work is just getting under way.

"We have one idea about nano-antennas, but there are other people with other ideas about nano-antennas," says Akyildiz. "It is a race."

Back to Top

Further Reading

Akyildiz, I. F. and Jornet, J. M.
The Internet of Nano-Things. IEEE Wireless Communication Magazine, vol. 17, no. 6, pp. 58-63, December 2010.

Burke, P. J., Li, S., and Yu, Z.
Quantitative Theory of Nanowire and Nanotube Antenna Performance. IEEE Transactions on Nanotechnology, 5(4), 314-334 (2006).

Perruisseau-Carrier, J.
Graphene for antenna applications: opportunities and challenges from microwaves to THz (invited). Loughborough Antennas & Propagation Conference (LAPC2012), UK, 2012.

Rouhi, N. et al.
Broadband Conductivity of Graphene from DC to THz, Nanotechnology (IEEE-NANO), 2011 11th IEEE Conference on, vol., no., pp.1205,1207, 15-18 Aug. 2011doi: 10.1109/NANO.2011.6144485 URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6144485&isnumber=6144287

Back to Top

Author

Alex Wright is a writer and information architect based in Brooklyn, NY.

Back to Top

Figures

UF1Figure. The structure of a graphene-based plasmonic nano-transceiver for wireless communication in the terahertz band.

UF2Figure. Nanomaterials enable new technologies.

Back to top


©2013 ACM  0001-0782/13/10

Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and full citation on the first page. Copyright for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, to republish, to post on servers, or to redistribute to lists, requires prior specific permission and/or fee. Request permission to publish from [email protected] or fax (212) 869-0481.

The Digital Library is published by the Association for Computing Machinery. Copyright © 2013 ACM, Inc.

0 Comments

No entries found